starlight Pro

Designed for the special needs of orthodontist

    cures all current materials used in orthodontics efficiently and fast
    exposure times of 5 sec and 10 seconds
    allows curing of a few brackets up to a whole quadrant, with the push of one button

LIGHT SPECTRUM

starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.

Technical Advantage

OPTICAL FIBRE

sterilizable, coherent, fibre optics conductor, Ø 8 mm

CLICK-CLACK CONNECTION

exclusive connection in metal ensures an optimal light beam transmission

OPTICAL PROTECTION

sterilizable, simple to apply to the optical fibre

CHARGING STATION

green control LEDs indicating mains supply and signalling consent for charging process and power output
in case of problems a yellow LED will flash

RADIOMETER

integrated radiometer which checks the power output
result indicated by a LED

LOW TEMPERATURE

it does not require a fan as it develops no heat – silent

HYGIENE

the smooth, continuous and compact surface enables perfect disinfection

PROCESSOR CONTROL

constant light power regardless the charge level

LOW BATTERY WARNING

the double acoustic signal is activated when the battery is still sufficient for 6 cycles

ACCUMULATOR

lithium-ion battery with no memory effect
charging time only 120 minutes
capacity of 640 cycles with 5 seconds

CHARGING TIME

only 90 minutes

Technical specifications

Device compliant to Dir. 93/42/CEE:	Class I
Class according to IEC/ EN 60601-1:	II Type B IP 20 (recharging unit) IP 20 (handpiece)
Power supply voltage:	recharging unit: 100-230 Vac 50/60 Hz 15 VA handpiece: lithium-ion battery, 3.7 V 1100 mAh
Charging time:	About 2 hours
Handpiece for intermittent operation:	120 sec ON 40sec OFF Max 3 times running
Light source:	High-luminosity LED with optics Class 2 M (IEC 60825-1) LEDs Dominant wavelength: 440 - 465 nm LED light emission: > 1.400 mW/cm2 Average life: 3,600,000 cycles, 10 seconds each
Exposure:	Exposure time 5 seconds - Acoustic signals indicating start and end of exposure Exposure time 10 seconds - Acoustic signal at the start, after 5 seconds and at the end of the 10 seconds The cycles can be stopped or repeated at any time
Operating conditions:	from +10°C to +35°C Relative humidity from 45% to 85% Pressure of air P: 800hPa/1060hPa
Transport and storage conditions:	from -20°C to +40°C Relative humidity from 45% to 85% Pressure of air P: 500hPa/1060hPa
Weights and sizes	Recharging unit: Weight 555 g L - W - H 96 x 120 x 58 mm Starlight Pro handpiece: Weight 105 g L 198 mm, max. Ø 23 mm
Warranty	device 3 years